Lenolink Telecommunication Co.,Ltd
Your Partner in the Mobile World!
Add to Cart
High Power Mobile Signal Repeater Power 30dBm 80dB Gain coverage area 3000sqm
Description
Lenolink provides a series of products to support different applications and customized your requirement. And the products cover single, dual and triple systems with one housing.
Consumer Repeater supports any three mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area from 100 to 500 sqm with proper engineering.
Design Advantage
1. auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
2. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
4. Very low power consumption.
5. Low cost design
Specification:
| Specifications: | ||||
| Parameters | Uplink | Downlink | ||
| Frequency Range | LTE800 (Band 20) | 832 ~ 862MHz | 791 ~ 821MHz | |
| GSM&EGSM (Band 8) | 880 ~ 915MHz | 925 ~ 960MHz | ||
| DCS (Band 3) | 1710 ~ 1785MHz | 1805 ~ 1880MHz | ||
| WCDMA (Band 1) | 1920 ~ 1980MHz | 2110 ~ 2170MHz | ||
| LTE2600 (Band 7) | 2500~2570MHz | 2620 ~ 2690MHz | ||
| Operation Bandwidth (-3dB) | Wide Band | |||
| Maximum Gain | JUP-27-TB | ≥75dB | ≥80dB | |
| JUP-30-TB | ≥75dB | ≥80dB | ||
| Output Power | JUP-27-TB | ≥20dBm | ≥27dBm | |
| JUP-30-TB | ≥23dBm | ≥30dBm | ||
| MGC (Manual Gain Control) | 31dB range/1dB step | |||
| AGC (Automatic Gain Control) | ≧25dB | |||
| Spurious Emission | 9KHz~1GHz | ≦ -36dBm | ||
| 1GHz~12.75GHz | ≦ -30dBm | |||
| Noise Figure | ≤ 6dB | |||
| VSWR | ≦2.0 | |||
| Group Delay | ≤1μs | |||
| LED Alarm | Power LED | DC ON/OFF | ||
| System LED | Alarm Red when ALC control over 15dB | |||
| RF Connector | N-Female | |||
| Impedance | 50Ω | |||
| Power Consumption | 60W | |||
| Power Supply | Input: AC 110~240V; Output: DC 10V/10A | |||
| Operating Temperature | -10℃~50℃ | |||
| Environment Conditions | IP40 | |||
Company Profile
Our company established in 2014, which is a new-high-tech enterprise which focus on microwave technology research,RF,microwave component and system industry development.We are located in ShenZhen, covering total 7300m2 and possess 300 advanced microwave detection devices and precision machining equipment. The capacity of production one year here is around USD200 million.
Our products contains 16 series and 1000 designs with their own property right and authority approval. The products are Power Splitter, Directional Coupler, RF Attenuator Dummy Load, Cable Assembly, Connector, Filter, Duplexer and Combiner. Customers' designs (OEM / ODM) are also available.
