Lenolink Telecommunication Co.,Ltd
Your Partner in the Mobile World!
Add to Cart
Wide Band Mobile Signal Booster 20 dBm 70dB Gain Coverage 1000sqm with LCD displayer
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.
Consumer Repeater supports any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area from 100 to 8000 sqm with proper engineering. The dual band repeater support two systems in one housing.
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.
Specification:
| Electrical specification | Uplink | Downlink | |||
| Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz | ||
| CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| GSM900 | 880 ~ 915 MHz | 925 ~ 960 MHz | |||
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
| PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
| WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |||
| AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |||
| LTE | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz | |||
| Max .Gain | ≥ 55dB | ≥ 60dB | |||
| ≥ 65dB | ≥ 65dB | ||||
| ≥ 65dB | ≥ 70dB | ||||
| Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
| ≥ 12dBm | ≥ 15dBm | ||||
| ≥ 15dBm | ≥ 20dBm | ||||
| Band width (-3dB) | Wide Band | ||||
| MGC | ≥ 31dB / 1dB step | ||||
| ALC | ≥ 15dB, auto shut off after 15dB | ||||
| Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
| WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
| Noise Figure | ≤6dB | ||||
| VSWR | ≤1.8 | ||||
| Group Delay | ≤0.5μs | ||||
| Frequency Stability | ≦ 0.01ppm | ||||
| Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 | ||||
| WCDMA Meet 3GPP TS 25.143 | |||||
| CDMA Meet IS95 & CDMA2000 | |||||
| WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
| Modulation Accuracy | ≦ 12.5% | ||||
| PCDE | ≦ -35dB@Spreading Factor 256 | ||||
| CDMA System | Rho | ρ> 0.980 | |||
| ACPR | Meet I S95 & CDMA2000 | ||||
| LED Alarm | Standard | ||||
| Power LED | Green light when power on. | ||||
| ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | ||||
| Mechanical Specifications | Standard | ||||
| I /O Port | N-Female | ||||
| Impedance | 50 ohm | ||||
| Operating Temperature | -25ºC~+55ºC | ||||
| Environment Conditions | IP40 | ||||
Our factory: