Lenolink Telecommunication Co.,Ltd
Your Partner in the Mobile World!
Add to Cart
LTE Digital Repeate 20dBm power 70dB gain app control
Description
Digital Repeater use digital technology to supports any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area from 100 to 8000 sqm with proper engineering.
Lenolink provides a series of products to support different applications and customized your requirement. And the products cover single, dual and triple systems with one housing.
Design Advantage
1. In-built FGPA module to realize channel selective or band selective , software programmable.
2. APP installed in your mobile to manage the system.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
Product description
1. Integrated structure design: Filter is milled from one solid piece and has no soldered parts, guaranteeing superior electrical performance.
2. Lower PIM, lower insertion loss, higher isolation, and higher power handing capacity.
3. Differentiated DC/AISG 1.1/2.0 pass allows full compatibility with requiring TMAs.
4. IP67 protection ensures stable performance in any environment.
5. Mounting hardware for Wall and Pole mount provided.
6. Compact design, easy installation.
7. Lifetime warranty.
New Features
1. High directivity / isolation
2. Cavity structure, 250W power handling, high reliability
3. Low insertion loss, low VSWR, low PIM
4. Suitable for indoor or outdoor applications, IP66 waterproof
5. Short lead time and fast delivery
Maximum support for 5 systems ( 2G, 3G, 4G )
| Electrical specification | Uplink | Downlink | |
| Frequency Range | CDMA | customized | customized |
| WCDMA | customized | customized | |
| Max .Gain | With external donor antenna | ≥ 70dB | ≥ 70dB |
| Max .Output Power | ≥ 15dBm | ≥ 20dBm | |
| Band width (-3dB) | one sub band with four customized bandwidth setting, max bandwidth 20MHz, Automatic/Manual Channel Selective | ||
| MGC ( Step Attenuation ) | ≥ 30dB / 0.5dB step, Independently Working Per Channel | ||
| Automatic Level Control | ≥ 30dB | ||
| Gain Flatness | ≤ 3dB(p-p) | ||
| Noise Figure | ≤ 6dB | ||
| V.S.W.R | ≤ 2 | ||
| Group Delay | ≤ 6μs | ||
| Interference Cancellation (ICS) | 30dB | ||
| Frequency stability | ≤ 0.01ppm | ||
| Out of Band Gain | 3GPP2 TS 25.106 | ||
| EVM | ≤ 10% (PCDE ≤ -35dB) | ||
| Spurious Emission & Intermodulation | 3GPP2 TS 25.106 | ||
| Interference Cancellation (ICS) | 30dB | ||
| Mechanical Specifications | Standard | ||
| I /O Port | N-Female for external antenna | ||
| Impedance | 50 ohm | ||
| Operating Temperature | -25ºC~+55ºC | ||
| Relative humidity (%) | 5 to 95% | ||
| Environment Conditions | IP40 | ||
| Dimensions | 189*170*80mm | ||
| Weight | ≤ 1.2kg | ||
| Power Supply | Input AC90~240V, 50/60Hz | ||
| Power Consumption | ≤ 10W | ||
| PC interface | USB | ||
| LED Indicator | Input RSSI, AGC Alarm, Isolation Alarm, Power On, Sleep, Output Power | ||